多分量数据全波形反演在气藏检测中的关键问题——以苏里格气田为例

苏里格气田是中国典型的致密砂岩气藏，构造简单、平缓，横向非均质性强，有效储层与围岩声学特征差别小，地震响应不明显，常规地震监测方法预测难度大，但气田含气砂岩泊松比低，是地震气藏检测的有效参数。利用弹性全波形反演精度高和能处理复杂非均质介质的优势，反演地层拉梅常数、剪切模量和密度，并计算泊松比，从而进行气藏预测。重点阐述了苏里格气田多分量数据全波形反演初始模型建模、先验模型建模和地震数据预处理3个关键问题的处理方法。二维三分量数据反演和"甜点"预测结果表明：①对于具有强非均质性的苏里格气田，利用全波形反演获得精度较高的地层弹性参数能显著提高气藏预测的准确度；②苏里格地区构造简单、平缓，利用常规叠加速度并结合构造解释可以建立比较好的初始模型，从而有效地解决了周波跳跃和局部极小的难题；③先验知识的约束和地震数据的预处理是全波形反演成功应用于苏里格气田气藏检测的关键。     

空间语义增强下的城市交通事故数据可视分析

目的 海量城市交通事故数据可能蕴含有交通事故的空间模式，挖掘出交通事故的空间模式有助于开展交通事故的防治工作。目前交通管理部门虽然记录了交通事故发生地的空间位置信息，但没有对事故发生地进行空间语义描述，从而影响对交通事故空间模式的深入分析。因此，提出一种交通事故数据空间语义增强方法，并设计了一套可视分析系统。方法 基于城市兴趣点来增强交通事故数据的空间语义。以事故发生点为中心获取周围城市兴趣点，使用特征向量刻画兴趣点的数量、类别及其与事故发生点的距离，并称此向量为空间语义特征向量。将空间语义特征向量和相应的交通事故关联，以达到增强其空间语义的目的。然后，基于空间语义特征向量，使用自组织映射聚类算法对交通事故进行聚类分析，根据其空间语义特征将交通事故分为若干类别。最后，通过使用地图视图展示事故点数据、聚类视图和平行坐标视图展示聚类分析的结果及其空间语义特征的可视化方法，对交通事故的空间模式进行分析。结果 针对空间语义增强的交通事故数据以及相关分析任务，有效地使用上述数据分析方法与可视化技术，设计并实现了一套多视图关联的可视分析系统，提供了便捷的交互方式辅助用户分析。通过研发人员和交通警察共同对安徽省合肥市2018年的交通事故数据进行分析，将交通事故发生地划分9类并指出每类地点的空间语义特点，进一步分析出了事故高发区域的空间语义特性。结论 本文提出的交通事故数据空间语义增强方法和可视分析方法可以帮助用户揭示交通事故的空间语义模式，有助于深入分析和认识交通事故的成因，能为交通事故防治相关的城市建设工作提供建议。     

Quantitative Relationship Between the Nucleation Undercooling of Liquid Iron and Its Liquid Structure: Investigated by In Situ Synchrotron Radiation

Metallurgical and Materials Transactions A - The nucleation behavior of liquid iron with various iron oxides was investigated through an in situ synchrotron radiation analysis and undercooling...     

Embedding ultrasmall Ag nanoclusters in Luria-Bertani extract via light irradiation for enhanced antibacterial activity

Nano Research - Ultrasmall silver nanoclusters (Ag NCs) with rich surface chemistry and good biocompatibility are promising in antibacterial application, however, further development of Ag NCs for...     

Research on optimization design of PWR flow distribution device based on numerical simulation

ABSTRACT

In the lower chamber of pressurized water reactor (PWR), the flow distribution device is the core module to distribute coolant into the core. It has complex structure and numerous design parameters. Therefore, it has important theoretical and practical significance to optimize the device. The mesh independence verification, turbulence model selection, and data processing all can influence the numerical simulation results of the lower chamber, in order to research the influence, a numerical simulation method based on the original model of CNP1000 reactor lower chamber is proposed in this paper. In the method, an optimization design method of flow distribution device is established based on surrogate model. The main design variables and optimization objectives are determined based on the device’s structure and function characteristics. And then it respectively adopts Kriging algorithm and multi-objective genetic algorithm to establish a surrogate model of flow distribution device and optimize it globally. Finally, the optimal design variables are obtained. Compared with the device’s performance before optimization, the after optimization has smaller total pressure loss and more uniform flow. The effectiveness and practicability of proposed optimization design method can be verified.     

磷酸高效分解磷矿实验研究

为改进湿法磷酸生产工艺,提高副产石膏的品质,减少湿法磷酸固体副产物磷石膏堆存产生的经济和环保压力,进行了磷酸分解磷矿制磷酸的实验研究。采用贵州某磷矿为主要原料,研究了湿法磷酸预分解磷矿的反应条件。通过单因素实验确定了湿法磷酸分解磷矿最优反应条件：反应温度为75 ℃,磷酸与磷矿的质量比（液固比）为9,反应时间为3 h,磷酸质量分数为30%（以五氧化二磷计）。在此条件下,磷矿的分解率为98.62%。     

粘性粒状炸药在北洺河铁矿的应用#br#

北洺河铁矿原采用膨化硝铵炸药和粘性粒状炸药混合装药，存在装药工序繁杂、返药率高、职工劳动强度大等问题。为解决该问题，通过对比膨化硝铵炸药和粘性粒状炸药的性能和优缺点，采用单一的粘性粒状炸药进行了工业试验。试验结果表明，粘性粒状炸药的增粘剂比例为9%~11%时，炸药粘稠度合理，能够减少防静电输料管的堵孔次数，降低炸药返药量；粘性粒状炸药装药在采矿工艺和爆破参数不变的条件下，完全能够取代原膨化硝铵炸药和粘性粒状炸药混合装药；粘性粒状炸药改善了中深孔的爆破效果，省去了筛药、配比、混合工序，降低了职工的劳动强度，减少了辅助材料的消耗。     

Indirect adaptive control of nonlinear system via dynamic multilayer neural networks with multi‐time scales

This paper deals with adaptive nonlinear identification and trajectory tracking problem via dynamic multilayer neural network with different time scales. By means of a Lyapunov‐like analysis, we determine stability conditions for the on‐line identification. Then, a sliding mode controller is designed for trajectory tracking with consideration of the modeling error and disturbance. The main contributions of the paper lie in the following aspects. First, we extend our prior identification results of single‐layer dynamic neural networks with multi‐time scales to those of multilayer case. Second, the e‐modification in standard use in adaptive control is introduced in the on‐line update laws to guarantee bounded weights and bounded identification errors. Third, the potential singularity problem in controller design is solved by using new update laws for the NN weights so that the control signal is guaranteed bounded. The stability of proposed controller is proved by using Lyapunov function. Simulation results demonstrate the effectiveness of the proposed algorithm. Copyright © 2014 John Wiley & Sons, Ltd.